AJA HDP2, Руководство по установке и эксплуатации, Страница: 14 / 31

HDP2 Mini-Converter v1.4r1 www.aja.com 14
When configuring the Mini-Converter, select it from the top pulldown, view the current
settings and change any values. Making a change communicates that new value to the
Mini-Converter’s non-volatile memory.
Tabbed Screens
The Tabs delineate control screens with groups of controls for each type of task to be
performed. The controls for the actual configuration parameters are specific to each
Mini-Converter type. Click on any of the tab buttons and the screen below will change to
match. Each of these screens are described on the following pages.
Video Tab Screen
The selections on this screen configure the output video. In all cases, selecting “Auto”
allows the HDP2 to conform the output to best serve the attached monitor. This is
handled automatically when the HDP2 reads the capabilities indicated by the attached
monitor.
Color Space: Selects the Video Format. Choose from Auto, 4:2:2 YCbCr, 4:4:4 RGB or 4:4:4 YCbCr.
Choosing “Auto” lets the HDP2 automatically select the format based on the capabilities
indicated by the attached monitor.
Deep Color: Selects how Deep Color is supported. Choose from Auto, On or Off. Choosing “Auto” lets
the HDP2 decide based on input. Choosing On turns on support for Deep Color 30-bit
video (24-bit also supported).
RGB Range: Selects the Input Video Color Range. Choose Auto to let the HDP2 decide, or choose
SMPTE or Full color range.