8
Switch 8 (AUX)—Control whether ancillary horizontal data is passed
or deleted from input (used with switches 1 through 4)
Installation
Typically, HD10AM installation consists of the following:
1.
disc5VDC from the converter
2.
configure the DIP switch for the desired equipment configuration
3.
connect video equipment to the converter BNCs
4.
apply +5VDC power to the converter (AJA power supply model DWP)
Specifications
LEFT
RIGHT
Whenever possible, pass all
incoming ancillary data except
packets marked for deletion
Delete all incoming horizontal
ancillary data before embedding
any new audio packets
Item
Specification
Video Formats
HD SMPTE 292/296/274M
SD SMPTE 259M
(Automatic Configuration)
Audio Data Formats
AES3-2003
SMPTE 337M
Video Input
HD-SDI or SDI BNC
Video Outputs (equalized)
HD-SDI or SDI BNC, 2 x BNC
Audio Inputs
4 x AES3 110 ohm XLR, Pro format
Audio Outputs
4 x AES3 110 ohm XLR, Pro format
Embedded Audio
SMPTE 272M (SD): 20-bit, 48KHz synchronous
SMPTE 299M (HD): 24 bit, 48KHz synchronous
Video Processing Delay
HD Mode: 7
μ
S
SD Mode: 19
μ
S
Audio Processing Delay
Disembed Delay: 290
μ
S
Embed Delay (SRC OFF): 290
μ
S
Embed Delay (SRC ON): 1500
μ
S
Sample Rate Converter
Resolution
24-bits
User Controls
External Dipswitch:
Embedder on/off, Ch pairs 1/2 - 7/8
Input group select, 1/2, 3/4
Output Group Select, 1/2, 3/4
SRC Bypass
AUX (pass or delete incoming ancillary data)
Size
5.8" x 3.1" x 1 (147 x 79 x 25mm)
Power
5-18V, 5 watts. Requires power supply.
