1
5
AJA HD10AM HD/SD 8-Ch AES Embedder/Disembedder User Manual — User Controls
User Controls
The user interface for the HD10AM is an 8-switch
DIP accessible through a cut-out in the bottom of
the unit. Use the DIP switches to configure how the
AES embedding and disembedding functions.
Note:
The combination of the AUX switch setting
(switch 8) and the other switches determines the
overall operation of the HD10AM.
The exact function of each DIP switch and what it
controls is described on the following pages.
Factory default switch settings are all in the leftmost
position.
Switch 1 (EMBD 1/2)—Controls audio embedding for channels 1/2
:
Switch 2 (EMBD 3/4)—Controls audio embedding for channels 3/4
:
Switch 3 (EMBD 5/6)—Controls audio embedding for channels 5/6
:
LEFT
RIGHT
Overwrite or embed new
channel 1/2 packets
If AUX=LEFT: Pass any channel 1/2
packets on input SDI
If AUX=RIGHT: Delete all channel
1/2 packets from input SDI
LEFT
RIGHT
Overwrite or embed new
channel 3/4 packets
If AUX=LEFT: Pass any channel 3/4
packets on input SDI
If AUX=RIGHT: Delete all channel
3/4 packets from input SDI
LEFT
RIGHT
Overwrite or embed new
channel 5/6 packets
If AUX=LEFT: Pass any channel 5/6
packets on input SDI
If AUX=RIGHT: Delete all channel
5/6 packets from input SDI
1 2 3 4 5 6 7 8
DIP Switch Setting
LEFT RIGHT
