OG-Fiber-Series openGear Card v1.1r1 10 www.aja.com
Figure 6. Fiber SFP Installation
NOTE: The SFP module must match the card’s capabilities for proper operation. Input
and output triangles next to the fiber ports identify which are inputs and which
are outputs.
Figure 7. An SFP Module
9. Close the frame door as follows:
A. Slide the door into the frame.
B. Pull and release the door tabs to ensure the frame door is securely locked
to the frame.
Cabling
Refer to
and
to identify the input and
output signal connectors.
NOTE: Keep the protective rubber plug in the SFP module until the fiber cabling is
actually connected to the module.
