OG-Fiber-Series openGear Card v1.1r1 6
www.aja.com
Connectors
Figure 1. Rear View of Empty Rear Card and Installed Dual Channel Fiber Cards
Output
BNC 1
(J1)
Input
Fiber 1
Input
Fiber 2
Output
BNC 2
(J2)
OG-FIBER-2R
Card Installed
Input
BNC 1
(J1)
Output
Fiber 2
Output
Fiber 1
Input
BNC 2
(J2)
OG-FIBER-2T
Card Installed
Output
BNC
(J1)
Input
Fiber
Output
Fiber
Input
BNC
(J2)
OG-FIBER-TR
Card Installed
OG-FIBER-Rear
Card
Seating tab to be inserted into frame seating slot.
NOTE: On the OG-Fiber-2T card, Output Fiber 2 is located above Output Fiber 1.
Figure 2. Rear View of Empty Rear Card and Installed Single Channel Fiber
Cards
Output
BNC 1
(J1)
Input
Fiber
Output
BNC 2
(J2)
OG-FIBER-R
Card Installed
Input
BNC
(J1)
Output
Fiber
Output
Loop
BNC
(J2)
OG-FIBER-T
Card Installed
OG-FIBER-Rear
Card
Seating tab to be inserted into frame seating slot.
Indicators
LEDs on the front (near door) of each card indicate, from top to bottom:
2T and 2R Cards
• DC power detected (green)
• Input 1 signal present (green)
• Input 1 SMPTE locked (green)
• Input 2 signal present (green)
• Input 2 SMPTE locked (green)
TR Cards
• DC power detected (green)
• Optical input signal present (green)
• Optical input SMPTE locked (green)
• SDI input signal present (green)
