AJA FS2 Скачать руководство пользователя

Страница: 104 / 125

FS2 v2.1r1

www.aja.com

104

Appendix A: Specifications

Video Format Conversion

The FS2 can convert almost any input format to nearly any output format, as long as the
frame rates are of the same family. The three families are:

• 59.94/29.97/23.98

• 50/25

• 60/30/24

Available input and output formats are listed later in this appendix.

Conversion Exceptions

• The following frame rates are not supported for input or output:

• 720p23.98/24/25/29.97/30.

• The FS2 cannot convert a 29.97 or 59.97 input to 23.98 Hz.

• The FS2 cannot convert a 30 Hz or 60 Hz input to 24 Hz.

• Outputs of 23.98 or 24 Hz can be derived only from 23.98 or 24 Hz inputs.

• Component I/O does not support 1080p.

• The FS2 does not support reverse 3:2 pulldown.

• The FS2 does not accept or produce 4:4:4 YCbCr, RGB, or XYZ inputs or outputs.

• The FS2 does not accept or produce YCbCr 4:2:2 12-bit inputs or outputs.

• The FS2 does not support embedded audio output for the following formats:

• 2K1080p 29.97 or 2K1080p 30

• 2K1080p 59.94 or 2K1080p 60 when 3G Config is set to 3 Gb Level B or 1.5 Gb

DualLink.

• The FS2 does not convert NTSC to PAL-M, or vice versa.

Video Format Alarms

When incompatible I/O formats are detected, an alarm can be triggered with these
results:

• Lights the relevant alarm LED on the front panel (FMT ERROR, 1 or 2).

• Displays an alarm in the browser user interface.

• Influences selection of the first-displayed status screen.

• Generates an SNMP trap (if configured).

• Triggers a GPI Output (if configured).

Video Input/Output Formats

SDI and Fiber

The FS2 has two standard SDI video inputs and outputs, and two optional Fiber video
inputs and outputs.

All SDI video inputs and outputs, including Fiber, are YCbCr 4:2:2 pixel format.

SD-SDI, 270Mb

(SMPTE 259)

• 525i/59.94

• 625i/50

USO

RESTRITO

Содержание FS2






























































































































Результаты поиска

Содержание FS2

Отзывы:

Похожие инструкции для FS2

Бренды по названию

Популярные бренды

AJA FS2, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FS2

Отзывы:

Похожие инструкции для FS2

Бренды по названию

Популярные бренды