AJA CION, Руководство по эксплуатации

Страница: 44 / 110

CION v1.1 www.aja.com 43
8.1 TC Value
This parameter selects an hour value from which timecode begins incrementing.
These are the options:
• 01:00:00:00 (default) – Sets the timecode value to 01:00:00:00
• 00:00:00:00 to 23:00:00:00 – The value may be adjusted for whole hour values, such as
02:00:00:00, 03:00:00:00, etc.
8.2 TC Type
This parameter selects drop frame or non-drop frame timecode.
These are the options:
• NDF (default) – Selects Non-drop Frame timecode
• DF – Selects Drop Frame timecode
NOTE: Drop frame timecode is not supported for 23.98, 24, 25 and 50 fps.
NOTE: If the menu parameter 8.0 TC In is set to LTC, the TC Type selection does not apply. TC Type only
applies to the TC Value or the Time of Day value generated by CION.
9.0 Interval Record
CION can be used to create time-lapse recordings via the 9.0 Interval Record, 9.1 Interval
Frames and 9.2 Interval Time selections.
NOTE: Menu parameters 9.1 Interval Frames and 9.2 Interval Time do not appear unless 9.0 Interval
Record is enabled.
These are the options:
• OFF (default) Normal recordings are produced
• ON Time-lapse recordings are produced
Example: The frame rate selected in the FPS menu Frame Rate parameter is 29.97 fps. The record
button is depressed, and the recording is then stopped 90 seconds later with the
following settings:
• 9.0 Interval Record > On
• 9.1 Interval Frames > 1
• 9.2 Interval Time > Second
The resulting recording would be 90 frames in duration, a frame rate of 29.97 fps and
would appear to be “undercranked” or “sped up” when compared to a normally created
recording.
NOTE: Selecting an interval frame number that exceeds the incoming video frames per second will
result in normal video. “Overcranking” or “slow motion” is not supported by the interval
recording feature. For slow motion, refer to the FPS menu Slow Motion parameter.