Aiwa XR-MD200 Скачать руководство пользователя страница 40

Страница: 40 / 72

2-7. Checking Operation of OWH (Over Write Head)

The OWH can be moved up and down by pressing the “CD

™

MD DIRECT REC” and the “EJECT” buttons in the state of

loading-completed.

“CD

™

MD DIRECT REC” button ........................ OWH DOWN

“EJECT” button ..................................................... OWH UP

Note:

Do not move down the OWH down when the high reflection disc (CD) is in use.

2-8. Checking the Servo Operation

•

Checking the focus search spindle kick

1) The focus search operation and the spindle kick operation can be performed continually by pressing

1 2

(PLAY) button

from the “ALL SV OFF” state without inserting a disc. During this check, the message “FOCUS SRCH” is displayed.

2) After checking these operations, press the

button to return to the “ALL SV OFF” state.

•

Checking the focus servo

1) Insert the test DISC.
2) Move the optical pickup to the center track or its around of a disc using the

and the

buttons.

3) Press the “MODE” button until the following servo mode is selected in accordance with the inserted DISC.

MO DISC (MO) ........................................ Select the “SELECT GRV” indication on the display.

PIT DISC (CD) ......................................... Select the “SELECT PIT” indication on the display.

4) Press the

button.

When the focus servo is operating normally, the message “FOCUS ON!” is displayed after “FOCUS SRCH”.

F C U S O N !

5) After the checking is completed, press the

button to return to the “ALL SV OFF” state.

•

Checking that the all servo loops are turned ON

1) The tracking servo and the sled servo are turned on and all servo loops work when the “MD MARK” (SHIFT+10) button is

pressed in the state of “FOCUS ON!”.
When all servo loops are normal, “ALL SV ON” is displayed.

A L S V O N

2) After the checking is completed, press the

button to return to the “ALL SV OFF” state.

Содержание XR-MD200









































































Результаты поиска

Содержание XR-MD200

Отзывы:

Похожие инструкции для XR-MD200

Бренды по названию

Популярные бренды

Aiwa XR-MD200, Руководство по обслуживанию

Результаты поиска

Содержание XR-MD200

Отзывы:

Похожие инструкции для XR-MD200

Бренды по названию

Популярные бренды