Aiwa XR-HG5MD Скачать руководство пользователя страница 32

Страница: 32 / 41

– 32 –

< DECK SECTION >

12. Tape Speed Adjustment (DECK 2)

Settings : • Test tape : TTA–100

• Test point : TP8(Lch), TP9(Rch)
• Adjustment location : SFR1

Method : Play back the test tape and adjust SFR1 so that the

frequency counter reads 3000Hz

5Hz and

45Hz

(REV) with respect to forward speed.

13. Head Azimuth Adjustment (DECK 1, DECK 2)

Settings : • Test tape : TTA–330

• Test point : TP8(Lch), TP9(Rch)
• Adjustment location : Head azimuth

adjustment screw

Method : Play back (FWD) the 8kHz signal of the test tape and

adjust screw so that the output becomes maximum.
Next, perform on REV PLAY mode.

14. PB Frequency Response Check (DECK 1, DECK 2)

Settings : • Test tape : TTA–330

• Test point :TP8(Lch), TP9(Rch)

Method : Play back the 315Hz and 8kHz signals of the test tape

and check that the output ratio of the 8kHz signal with
respect to that of the 315Hz signal is within 5dB.

15. PB Sensitivity Check (DECK 1, DECK 2)

Settings : • Test tape : TTA–200

• Test point : TP8(Lch), TP9(Rch)

Method : Play back the test tape and check that the output level of

the test point is 100mV

3dB.

16. REC/PB Frequency Response Adjustment (DECK 2)

Settings : • Test tape : TTA–602

• Test point : TP8(Lch), TP9(Rch)
• Input signal : 1kHz / 8kHz (LINE IN)
• Adjustment location : SFR451 (Lch)

SFR452 (Rch)

Method : Apply a 1kHz signal and REC mode. Then adjust

OSC attenuator so that the output level at the TP8,
TP9 becomes -20VU. Record and play back the 1kHz
and 8kHz signals and adjust SFRs so that the output of
the 8kHz signals becomes 0dB

0.5dB with respect to

that of the 1kHz signal.

17. REC/PB Sensitivity Check (DECK 2)

Settings : • Test tape : TTA–602

• Test point : TP8(Lch), TP9(Rch)
• Input signal : 1kHz (LINE IN)

Method : Apply a 1kHz signal and REC mode. Then adjust

OSC attenuator so that the output level at TP8, TP9
becomes 0VU. Record and play back the 1kHz signals
and check that the output is 0dB

3.0dB.

< FRONT SECTION >

18.

-CON OSC Adjustment

Settings : • Test point : TP11 (CLK)

• Adjustment location : L151

Method : Insert AC plug while pressing TUNER function key.

Adjust L151 so that the frequency at the test point is
209.55Hz

0.05Hz.

Содержание XR-HG5MD










































Результаты поиска

Содержание XR-HG5MD

Отзывы:

Похожие инструкции для XR-HG5MD

Бренды по названию

Популярные бренды

Aiwa XR-HG5MD, Руководство по обслуживанию

Результаты поиска

Содержание XR-HG5MD

Отзывы:

Похожие инструкции для XR-HG5MD

Бренды по названию

Популярные бренды