Aiwa XP-R210, Руководство по эксплуатации

Страница: 13 / 18

22
English
RADIO RECEPTION
Tuning in to a station
1 Press TUNER ON/BAND repeatedly to select AM
or FM.
2 Press TUNING + ( t ) or - ( r ) to tune in to a
station.
After listening, press s STOP/OFF/CHARGE to turn
off the radio.
For quick tuning
Keep either TUNING
+ ( t ) or - ( r ) pressed for
about 1 second. When a station is tuned in to, the
frequency stops automatically. However, it does not stop
if the broadcast signal is weak.
For better reception b
A
FM: The headphone cord functions as the FM antenna.
Keep it extended.
AM: Turn the unit to find the position which gives the
best reception.
To listen to an FM stereo broadcasting
When a tuned in station is in stereo, ST changes to
.
When the FM stereo signal is weak and distorted, press
MONO/ST. ST goes out and the sound will be heard in
monaural but distortion will be reduced.
Note
• Do not open the disc compartment during radio
reception. The buttons will be deactivated.
• The power is turned off automatically if no operation is
made after 180 minutes from the last operation during
radio reception.
AM steps b
B
Radio broadcasts have different frequency ranges and
changes in different steps in different countries.
This unit is factory-set to 9 kHz steps on AM. When using
the unit where the AM step changes to 10 kHz, set the
AM STEP switch on the inner side of the disc
compartment to 10 kHz.
• When the AM step is changed, stations that you preset
are erased.
A
B
1
2
AM FM
AM STEP
9kHz
10kHz