background image

ENGLISH

3

INTRODUCTION

En

IMPORTANT SAFETY
INSTRUCTIONS

CAUTION:

PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THESE OPERATING INSTRUCTIONS
AND THOSE MARKED ON THE UNIT. RETAIN THIS
BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this unit will
protect you if you observe the following procedures for
installation, use and servicing.
This unit is fully transistorized and does not contain any
parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY
BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
ONLY.

1. Read operating instructions

After unpacking this product, read the operating
instructions carefully, and follow all the operating and
other instructions.

2. Power sources

This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply in your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or
other sources, refer to the operating insturctions.

3. Grounding or polarization

This product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

4. Ventilation

Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must
not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug or
other similar surface.
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.

5. Heat

The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

6. Water and moisture

Do not use this product near water - for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool and the like.

7. Cleaning

Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

8. Power cord protection

Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where
they exit from the product.

9. Overloading

Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.

10.Lightning

For added protection of this product during storms, or
when it is left unattended and unused for long periods
of time, unplug it from the wall outlet.
This will prevent damage to the product due to lightning
and power line surges.

11.Object and liquid entry

Never push objects of any kind into this product through
openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.

12.Attachements

Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

13.Accessories, carts and stands

Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury
to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer's
instructions, and should use a mounting accessory
recommended by the manufacturer. A product and cart
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
product and cart combination to overturn.

14.Disc tray

Keep your fingers well clear of the disc tray as it is
closing. It may cause serious personal injury.

Содержание XD-SPM823




























































Отзывы: