manualshive.com logo in svg

Aiwa TV-FT2588, Руководство по обслуживанию

Поделиться
Скачать
Aiwa TV-FT2588 Скачать руководство пользователя страница 20

– 20 –

4-2.

SUB COLOR   Sub-color Adjustment
PAL

Adjustment Menu No. 38
Input signal : Color bar (VIDEO IN)
Measuring instrument : Pattern generator / PAL
Test point : CN901

3

PIN  B

• Use the “ CHANNEL”  keys to scroll through the adjustment menu and set to No. 38.
• Use the volume keys on the jig remote controller and adjust the test point voltage

to 2.0 

±

 0.1 Vp-p.

NTSC

Adjustment Menu No. 1
Input signal : Color bar (VIDEO IN)
Measuring instrument : Pattern generator / NTSC
Test point : CN901

3

PIN  B

• Use the “ CHANNEL”  keys to scroll through the adjustment menu and set to No. 1.
• Use the volume keys on the jig remote controller and adjust the test point voltage to 1.9 

±

 0.2 Vp-p.

SECAM

Adjustment Menu No. 40
Input signal : Color bar (VIDEO IN)
Measuring instrument : Pattern generator / SECAM
Test point : CN901

3

PIN  B

• Use the “ CHANNEL”  keys to scroll through the adjustment menu and set to No. 40.
• Use the volume keys on the jig remote controller and adjust the test point voltage to 2.0 

±

 0.1 Vp-p.

4-3.

PIN & BARREL ZOOM MODE   Pin Phase & Pin Amplitude (Barrel) Adjustment / Zoom Mode
PAL

Adjustment Menu No. 102
Input signal : Crosshatch
Measuring instrument : Pattern generator / PAL
• Use the “ CHANNEL”  keys to scoll through the adjustment menu and set to No. 102.
• Use the volume keys on the jig remote controller and adjust the vertical lines become straight.

NTSC

Adjustment Menu No. 104
Input signal : Crosshatch
Measuring instrument : Pattern generator / NTSC
• Use the “ CHANNEL”  keys to scroll through the adjustment menu and set to No. 104.
• Use the volume keys on the jig remote controller and adjust the vertical lines become straight.

4-4.

PIN & BARREL 16:9 MODE   Pin Phase & Pin Amplitude (Barrel) Adjustment / 16.9 Mode
PAL

Adjustment Menu No. 103
Input signal : Crosshatch
Measuring instrument : Pattern generator / PAL
• Use the “ CHANNEL”  keys to scoll through the adjustment menu and set to No. 103.
• Use the volume keys on the jig remote controller and adjust the vertical lines become straight.

NTSC

Adjustment Menu No. 103
Input signal : Crosshatch
Measuring instrument : Pattern generator / NTSC
• Use the “ CHANNEL”  keys to scroll through the adjustment menu and set to No. 103.
• Use the volume keys on the jig remote controller and adjust the vertical lines become straight.

Содержание TV-FT2588






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды