– 15 –
PAGE 1
1-1.
H POS Horizontal Positioning Adjustment
PAL
Adjustment Menu No. 14 (Page 1-1)
Input signal : Crosshatch
Measuring instrument : Pattern generator / PAL
• Use the volume keys on the jig remote controller to adjust the dot mark in the centre of
crosshatch screen to the exact centering position by allocating an equal number of squares
on the left and right side of the dot. A=B (Fig. 1-1)
NTSC
Adjustment Menu No. 87
Input signal : Crosshatch
Measuring instrument : Pattern generator / NTSC
• Using the “ CHANNEL” key, scroll through the adjustment menu and select No.87.
To adjust, follow the same procedure as PAL.
1-2.
V POS Vertical Positioning Adjustment
PAL
Adjustment Menu No.15 (Page 1-2)
Input signal : Crosshatch
Measuring instrument : Pattern generator / PAL
• Using the volume keys on the jig remote controller, adjust the dot mark to the
exact vertical centre position in the crosshatch screen. (Fig. 1-2)
NTSC
Adjustment Menu No. 86
Input signal : Crosshatch
Measuring instrument : Pattern generator / NTSC
• Use the “ CHANNEL” key to scroll through the adjustment menu and select
No. 86. To adjust, follow the same procedure as PAL.
1-3.
OSD H OSD Horizontal Positioning Adjustment
PAL
Adjustment Menu No. 16 (Page 1-4)
Input signal : Crosshatch
Measuring instrument : Pattern generator / PAL
• Use the volume keys on the jig remote controller to adjust each A and B positions
on both left and right in the equal distance towards the screen edge in the OSD
display. A = B (Fig. 1-3)
NTSC
Adjustment Menu No. 88
Input signal : Crosshatch
Measuring instrument : Pattern generator / NTSC
• Use the “ CHANNEL” key to scroll through the adjustment menu and select
No.88. To adjust, follow the same procedure as PAL.
