Aiwa NSX-SZ35, Руководство по обслуживанию

Страница: 22 / 32

– 22 –
Pin No. Pin Name I/O Description
42 I-HOLD I Power failure detected input.
43 I-CDSW I CD mecha switch input.
44 I-SPEANA_L I A/D L-input for spectrum analyser level display.
45 I-SPEANA_R I A/D R-input for spectrum analyser level display.
46 I-KEY1 I Key1 input.
47 I-KEY2 I Key2 input.
48 I-KEY3 I Key3 input.
49 I-TU_SIG I Tuner signal input. (Not used)
50 AVSS – GND.
51 O-PLL_CLK O PLL clock enable output.
52 O-PLL_CE O Chip enable output for tuner PLL.
53 O-CD_LED O CD flash window LED ON/OFF output.
54 O-KSCAN O Key scan output.
55 O-CD_CLK O CD clock output.
56 O-CD_DATA O CD data output.
57 O-CD_CE O CD enable output.
58 NC – Not connected.
59 I-JOG_B I Dial jog rotary encoder input B.
60 I-JOG_A I Dial jog rotary encoder input A.
61 I-VOL_B I Volume rotary encoder input B.
62 I-VOL_A I Volume rotary encoder input A.
63 I-REB – Deck 2 side-B recordable switch data input. "L" = REC. (Not used)
64 I-TM_BASE I Base input for clock.
65 I-CAM2 I DECK2 CAM switch data input.
66 I-CAM1 I DECK1 CAM switch data input.
67 P1/I-AUTO2 O/I FL segment P1 output / DECK2 AUTO STOP switch data input.
68 P2/I-AUTO1 O/I FL segment P2 output / DECK1 AUTO STOP switch data input.
69 P3/I-CST2 O/I FL segment P3 output / DECK2 cassette detect switch data input.
70 P4/I-CST1 O/I FL segment P4 output / DECK1 cassette detect switch data input.
71 ~ 72 P5, P6 O FL segment P5 ~ P6 output.
73 P7/LW O/I FL segment P7 output / LW mode data input.
74 ~ 78 P8 ~ P12 O FL segment P8 ~ P12 output.
79 VDD2 – Power supply.
80 VLOAD – Power supply for FL display.
81 P13/C-JACK O/I FL segment P13 output / C-JACK data input (not used).
82 P14/ECO-OFF O/I FL segment P14 output / ECO-OFF data input (not used).
83 ~ 90 P15 ~ P22 O FL segment P15 ~ P22 output.
91 ~100 G1 ~ G10 O FL grid G1 ~ G10 output.