en
10
11
Battery must be inserted correctly to avoid damage to the remote control. Always remove the battery
when the remote control will not be used for a long period of time, as this will cause leakage to the
battery and subsequently damage the remote.
Notes:
•
If the distance required between the remote control and the appliance decreases, the batteries
are exhausted. In this case replace the batteries with new ones.
•
The main power button on the front panel of the main unit must be ’ON‘ in order for the remote
control to operate.
POWER ON/OFF
To turn on the micro system, press the
button on the front panel of the unit or on
the remote control.
To turn off the micro system, press the
button again.
MUTE BUTTON
(On remote control only)
You can also press the
MUTE
button on
the remote control to turn off the sound
temporarily, for example, when answering
the telephone.
Press the
MUTE
button again to cancel
the mute function and restore the sound.
The mute function will also be canceled
automatically by pressing the
VOL +
or
VOL -
buttons.
SOURCE BUTTON
Press the
SOURCE
button repeatedly to
switch among
CD/ TUNER/ LINE IN/ BT
modes.
To select the
USB
mode please press
CD/
USB
button on the remote control to switch
into
USB
mode.
You can also acces the
USB
mode with the
buttons of the unit:
Press the
SOURCE
button and then
CD
MODE
. Then the unit will search for a CD,
but if there isn’t a CD inside the unit, it will
jump directly to the
USB
mode.
Please note that this process can take
a few seconds.
VOLUME LEVEL
Turn the
VOLUME
knob on front panel
or press
VOL +
or
VOL -
buttons on the
remote control to adjust the volume level.
TREBLE ADJUSTMENT
Press
or
TREBLE -
button on
the remote control to adjust the treble
effect.
BATTERY INSTALLATION
SETTING AND BASIC OPERATION
BASS ADJUSTMENT
Press
BASS+
or
BASS-
button on the
remote control to adjust the bass effect.
EQ (EQUALIZER)
Press the
EQ
button on the remote control
to scroll through the following equalizer
settings:
Rock-Pop-Jazz-Classic
.
LOUDNESS
Press
LOUDNESS
button to enhance the
bass level immediately when bass is not
enough.
BATTERY INSTALLATION
Slide out cover and install
2 AAA TYPE
batteries (included) with polarities as shown:
