Aiwa LCX-MT22, Руководство по эксплуатации

Страница: 11 / 45

11
En
Programmed play
Plays back up to 30 selected tracks in programmed order.
1
Hold down SHIFT and press PROGRAM on the
remote control in stop mode.
" PROGRAM " lights up on the display.
2 Press the numbered buttons on the remote
control to program a track.
-To select the 25th track, press +10, +10 and 5.
-To select the 20th track, press +10, +10 and 0.
The selected track number lights up on the display.
3 Repeat step 2 to program other tracks.
The total number of selected tracks and total playing time
will be displayed.
4 Press CD
E
.
The track number being played currently is displayed.
•During programmed playback, you cannot
-select "
" 1
" play or random play.
-select a track with the numbered buttons.
•If the total play time of the program exceeds 99 minutes and
59 seconds, or if a track with a track number exceeding 30
is programmed, the playing time is displayed as
"
- -:- -
".
To check the program
Press f or g repeatedly in stop mode. The track
number and program number are displayed in succession.
To clear the program
Press
s
in stop mode.
To add tracks to the program
Repeat step 2 before starting play. The tracks are added to the
end of the program.
To change the programmed tracks
Clear the program and repeat all the steps again.
Notes on CDs
•Do not place more than one disc.
•Do not tilt the unit with a disc loaded.
•The unit may not play CD-R/RW discs recorded on personal
computers or certain kinds of CD-R/RW recorders.
•Do not attach adhesive label, etc. to either side of
CD-R/RW discs, as doing so may cause malfunction.
•Do not load an unrecorded CD-R/RW disc. The disc may be
damaged.
You can place a CD case on the supplied AM antenna as
illustrated below.