Aiwa JAX-S7, Руководство по эксплуатации

Страница: 14 / 56

14
En
Programed playback
You can program the unit to playback selected tracks from one
or more discs in any order you specify.
1 In the stop mode, press MODE repeatedly until
“
PLAYMODE
” appears in the display and then
press ENTER.
2 Turn MULTI JOG to select “ PROGRAM ” and then
press ENTER.
“
PGM
” lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
3
Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
On the remote, press DISC SKIP.
•If you press ENTER after pressing DISC DIRECT PLAY
1-3 to select a disc, the complete disc is programmed
to play.
•If you press ENTER after you select a MP3 album (see
“To select an album” on page 15), the complete album
is programmed to play.
DISC DIRECT
PLAY 1-3
1–0/10,
+10
DISC SKIP
CLEAR
MULTI JOG
ENTER
MODE
PLAY MODE
4 Turn MULTI JOG to select a track and then press
ENTER.
The selected track number and the program number appear
in the display.
On the remote, press
r
or
t
and then press ENTER
or press the numbered buttons:
-To select the track 10, press 0/10.
-To select the track 20, press +10, +10 and 0/10.
-To select the track 25, press +10, +10 and 5.
5 Repeat step 3 and 4 to program other tracks.
6 Press
c
(
c
/
d
on the remote).
On the remote, press PLAY MODE repeatedly until “
PGM
”
lights up and carry out step 3 to 6.
•During programed playback, you cannot select a disc or a
track with the numbered buttons.
•If the total playback time of the program exceeds 99:59
minutes, or if a track with a track number exceeding 20 is
programed, the playing time is displayed as “
- -:- - ”.
•You cannot program more than 25 tracks. “
FULL
” is
displayed.
To clear a track
Press
s
(CLEAR on the remote) in stop mode. A track is
cleared from the end of the program.
To add tracks to the program
Repeat step 1 to 4 before starting playback. The tracks are
added to the end of the program.
To cancel programed playback
Carry out step 1 and 2 and select “
ALL DISCS
CONTINUE ”, “ 1 DISC CONTINUE ” or “ 1 ALBUM
CONTINUE ” in step 2.
•The program contents are retained even if the program is
canceled or after programed playback finishes. The same
program plays back if you carry out step 1, 2 and 6.
Notes on CDs
•Do not place more than one disc on one tray.
•Do not tilt the unit with discs loaded.