background image

4

En

Remote control

While sliding the latch, pull out the battery holder from the
bottom of the remote control. Place the supplied battery on
the battery holder with correct polarity. Finally, insert the holder
back into position.

CR2025

•When you operate the remote control, aim the remote control

at the main unit. When the remote control is operated, the
display colour changes for a few seconds.

•Replace the battery with a new one when the operational

distance between the remote control and main unit becomes
shorter.

•Remove the battery if the unit is not going to be used for an

extended period of time.

•The remote control may not operate if it is used under intense

sunlight or if its line of sight is obstructed.

Caution!

•Do not keep the battery near metallic objects such as rings,

bracelets, and keys. It may cause the battery to short circuit.

•After removing the battery, be sure to keep it out of reach of

children. In case it is swallowed, consult a doctor
immediately.

Connection

Plug in the AC power cord to the AC power outlet after all other
connections are made.

Connect the speaker cords to the speakers.

Connect the amber cords to the + terminals and the silver
cords to the – terminals.

Connect the speakers to the main unit.

Connect the right speaker to the SPEAKERS R terminals
and the left to the SPEAKERS L terminals. The amber cords
go to the 

 terminals.

PREPARATIONS

Connect the supplied antennas.

Connect the FM antenna to the FM 75 

 terminals and

the AM antenna to the AM LOOP terminals.

Connect the AC power cord to an AC power outlet.

When the AC power cord is connected to an AC power
outlet for the first time, "

DEMO

" appears on the display.

To deactivate the DEMO, press DEMO/ECO and the clock
will flash on the display. For setting the clock, see page 9.

Speakers

•Do not short-circuit the 

 and 

 speaker cord leads.

•Do not leave objects generating magnetism or objects

affected by magnetism near the speakers.

Antennas

Keep antennas away from metallic objects, electrical
equipment and cords.

FM antenna

: Extend fully in a T-shape. If reception is poor,

connect an optional outdoor antenna to the FM 75 

 terminals.

Be sure to connect the shield braid of the antenna to the 

2

terminal.

AM antenna

: Rotate to find the best reception.

AM antenna

FM antenna

Содержание CX-LX7



















Отзывы: