Aiwa CX-JT8, Руководство по обслуживанию

Страница: 4 / 46

20
CX-JT8
[GC TEST MODE]
• This mode is used to check the fluorescent indicator tube, LED
and key.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press three keys of x ,
[HEAVY]
and
[DISC DIRECT PLAY 2]
simultaneously.
3. Fluorescent indicator tube and LEDs are all turned ON.
4. Press two keys of
[HEAVY]
and
[DISC DIRECT PLAY 2]
simultaneously, mode is changed over.
5. In the key check mode, press each key, the defined key number
of every each key list is displayed on the fluorescent indicator
tube.
6. In the key count check mode, “K-CNT
0
” is displayed on the
fluorescent indicator tube. Each time a key is pressed, “K” value
increases. However, once a key is pressed, it is no longer taken
into account.
7. In the headphone input check mode, connect the headphone,
the message “H_P ON” is displayed on the fluorescent indicator
tube, and disconnect the headphone, the message “H_P OFF”
is displayed on the fluorescent indicator tube.
8. In the volume check mode, turn the
[VOLUME]
knob, the
display on the fluorescent indicator tube is changed over to
“VOL UP”, “VOL FLAT” or “VOL DOWN”
[MC TEST MODE]
• This mode is used to check operations of Amplifier.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press three keys of x ,
[HEAVY]
and
[DISC DIRECT PLAY 3]
simultaneously.
3. When the MC test mode is activated, the message “MC MODE”
is displayed on the fluorescent indicator tube momentarily, then
VACS level is displayed on the fluorescent indicator tube.
4. Press the
[TECHNO]
key, the display on the fluorescent
indicator tube is changed over to “EQ MAX”, press the
[MANUAL]
key, the display on the fluorescent indicator tube is
changed over to “EQ MID”, press the
[HIP POP]
key, the
display on the fluorescent indicator tube is changed over to “EQ
MIN”,
5. Turn the
[VOLUME]
knob, the display on the fluorescent
indicator tube is changed over to “VOL MAX”, “VOL MID” or
“VOL MIN”
6. Press the
[ENTER]
key, VACS ON/OFF is changed over.
7. When the
[REC PAUSE/START]
key is pressed with a tape set
in the deck-B, the function is switched “MD” or “VIDEO” and
recording starts. When the
m or M key is pressed during
recording, the tape is rewound back to the beginning of
recording, the function is switched to “TAPE B”, then playback
starts.
8. When the
[CD SYNC]
key is pressed with the test tape (AMS-
100, AMS-110A) in the deck, number of space between tunes
is counted, then if AMS-110A is set, “OK” is displayed on the
fluorescent indicator tube and if AMS-100 is set, “NG” is
displayed on the fluorescent indicator tube.
9. To release from this mode, press the
[POWER]
key.
[MODEL, DESTINATION AND VERSION DISPLAY]
• This mode is used to check the model, destination and software
version.
Procedure:
1. Set to the standby state.
2. Press three keys of
x ,
[TECHNO]
and
[HEAVY]
simultaneously.
3. When the model, destination and version display mode is
activated, the model an destination is displayed on the
fluorescent indicator tube.
4. Press two keys of
[HEAVY]
and
[DISC DIRECT PLAY 2]
simultaneously, mode is changed over to model and destination
display mode and version display mode.
5. In the version display mode, press the
[DISC DIRECT PLAY 3]
key, display is changed over to version display and year, month
and day of the software creation display.
6. To release from this mode, press the two keys of
[TECHNO]
and
[HEAVY]
simultaneously.
[CD ERROR CODE DISPLAY]
• This mode can be used for error display of CD section.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[CD]
key to select “CD”.
3. Press three keys of
x
,
[HEAVY]
and
[DISC DIRECT PLAY 1]
simultaneously.
Note: Error code is not displayed on the liquid crystal display.
[CD SERVICE MODE]
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[CD]
key to select “CD”.
3. Press three keys of
x
,
[HEAVY]
and
Z
simultaneously.
4. When the CD service mode is activated, the message “TRVS
ON” is displayed on the fluorescent indicator tube.
5. Press the
M
key, optical pick-up move to outside track and
the message “SLED OUT” is displayed on the fluorescent
indicator tube.
6. Press the m key, optical pick-up move to inside track and
the message “SLED IN” is displayed on the fluorescent indicator
tube..
7. Press the
[TECHNO]
key, traverse ON/OFF is changed over.
[5 REPEAT LIMIT CANCEL]
• Number of repeat for CD playback is 5 times when the repeat
mode is “REPEAT”. This mode is used to enables CD to repeat
playback for limitless times.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[CD]
key to select “CD”.
3. Press three keys of
x
,
[HEAVY]
and
Y
simultaneously.