ENGLISH
6
ENGLISH
6
Remote control (back)
Insulating sheet
Preparations
A lithium battery is installed in the remote control at the
factory.
Before you use the remote control, be sure to remove
the insulating sheet by simply pulling it out.
Replacing the battery
1
Insert the tip of a pointed object
A
into the hole
B
and pull out the battery holder to remove the lithium
battery (CR2025).
Remote control (back)
Battery holder
2
Install a new lithium battery (CR2025) with the
)
side facing up in the battery holder.
3
Push the battery holder into the unit until it clicks.
Note
When the infrared receptor on the main unit is exposed
to direct sunlight, it may not respond to signals from the
remote control.
OTHER FUNCTIONS
SEL
PS
Jog dial (PUSH-SOURCE)
Changing the key illumination color
You can choose blue or red as the key illumination color.
1
Press and hold
Jog dial (PUSH-SOURCE)
until
“ILL” appears on the display.
2
Turn
Jog dial
to select “1 (for blue)” or “2 (for red).”
Setting the dimmer of the display
1
Press and hold
SEL
until “D” appears in the display.
2
Turn
Jog dial
to select “0 (bright)” or “1 (dimmed).”
Displaying the VU level indicator
1
Turn off the unit.
2
Press and hold
PS
until “VU” appears in the display.
3
Turn
Jog dial
to selection (level indicators appear)
or off (level indicators disappear).
4
Press
PS
.
CARD REMOTE CONTROL
Names of parts
1
TUNER button
2
CD button
3
AMS (Auto music sensor)
r
button
4
AMS (Auto music sensor)
t
button
5
PS (preset) button
6
TUNING UP/DOWN buttons
7
VOLUME
+
/
-
buttons
