background image

1

  ENGLISH

PRECAUTIONS

• Use only in a 12-volt DC negative-ground electrical

system.

• Disconnect the vehicle’s negative battery terminal

while mounting and connecting the unit.

• When replacing the fuse, be sure to use one with an

identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the
unit.

• Do NOT attempt to disassemble the unit. Laser beams

from the optical pickup are dangerous to the eyes.

• Make sure that pins or other foreign objects do not get

inside the unit; they may cause malfunctions, or create
safety hazards such as electrical shock or laser beam
exposure.

• When your vehicle has been parked in direct sunlight

resulting in a considerable rise in the temperature
inside, allow the unit to cool off before operating it.

• Keep the volume at a level at which you can hear

outside warning sounds (horns, sirens, etc.).

NOTE

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on circuit

different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Modifications or adjustments to this product, which are
not expressly approved by the manufacturer, may void
the user’s right or authority to operate this product.

In addition to ordinary CDs, CD-Rs or CD-RWs can
be read by this unit. However, NEVER use a CD-R or
CD-RW that contains no data or data in the wrong
format, such as MP3 or other computer files.

For installation and connections, refer to the separate
“INSTALLATION AND CONNECTIONS.”

1

  ENGLISH

Note

Some buttons are assigned two or more functions.
For detailed descriptions, refer to the related pages.

CD Notes

• Playing a defective or dusty CD can

cause dropouts in sound.

• Hold CDs as illustrated.
• Do NOT touch the unlabeled side.
• Do NOT attach any seal, label or

data protection sheet to either side of
CD.

• Do NOT expose a CD to direct sunlight or excessive

heat.

• Wipe a dirty CD from the center outward with a cleaning

cloth.
Never use solvents such as benzine or alcohol.

• This unit cannot play 3-inch (8 cm) CDs.
• NEVER insert a 3-inch CD contained in the adapter or

any irregularly shaped CD.
The unit may not be able to eject it, resulting in a
malfunction.

Resetting the unit

Before operating the unit for the first time or after
replacing the car battery, you must reset the unit.
Press the reset button with a pointed object such as a
pencil.

Front panel detached

Reset button

Note

Pressing the reset button will erase the clock and some
memorized functions.

DEMO (Demonstration) mode

The unit has an extra display (DEMO) mode which
demonstrates  the illumination modes of the unit. The
unit switches to DEMO mode automatically if you turn
the unit on and leave it as it is for 5 seconds after all the
connections have been completed.

To cancel DEMO mode

1

During DEMO mode, press and hold 

Jog dial (PUSH-

SOURCE)

 until “ILL” appears on the display.

2

Press + or – to select “DE.”

3

Turn 

Jog dial 

to select “0.”

To resume DEMO mode, select “1” in step 3.
(See the illustration on page 2.)

TABLE OF CONTENTS

THEFT PROTECTION .............................................. 2
BASIC OPERATION, AUDIO AND CLOCK

ADJUSTMENT ..................................................... 2

RADIO OPERATION ................................................. 3
CD PLAYER OPERATION ........................................ 4
AUXILIARY EQUIPMENT ......................................... 5
OTHER FUNCTIONS ................................................ 6
CARD REMOTE CONTROL ..................................... 6
TROUBLESHOOTING .............................................. 7
MAINTENANCE ........................................................ 7
SPECIFICATIONS .................................................... 7

Содержание CDC-X437










Отзывы: