Aiwa CDC-X427, Руководство по эксплуатации

Страница: 5 / 9

ENGLISH
4
ENGLISH
4
Monaural mode
When signals become weak, or reception becomes
poor, the unit automatically switches to Monaural mode
to reduce noise.
Local mode
Local mode allows you to tune in only to strong stations
during Seek Tuning.
1
Press LO before you start seek tuning.
“LO” appears in the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable
stations.
Using preset stations
You must preset stations before you can tune in a station
using preset station number buttons.
i
/
k
PS/A.ME
BAND
Preset station number
Presetting stations automatically
(Auto Memory)
1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, AM1, or AM2).
2
Press and hold PS/A.ME until automatic presetting
starts.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to the station stored on preset station
button 1.
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1
Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Presetting stations manually
(Manual Memory)
1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, AM1, or AM2).
2
Press i or k to tune in to a desired station (see
“Tuning in to a station” as well for another tuning
method).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.
Tuning in to a preset station
1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, AM1 or AM2).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
CD PLAYER OPERATION
Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
r
/
t
z
INT RNDM
REP 1
SRC
1
Insert a CD.
“CD” appears in the display.
CD play starts.
If a CD is already inserted, press SRC repeatedly to
select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Preset station buttons 1 to 6