background image

EN

13

Note

• The disc is neither inserted nor ejected when

the unit is not turned on.

• Smaller 3-inch (8 cm) CDs can not be played on

this unit.  And do not use an adaptor as it may
cause malfunctioning.

• The playback starts from the first track on the

disc only when inserting a disc.  In other cases
(when switching from the radio operation or
turning on the unit), the playback starts from the
beginning of the track being played when the
playback has stopped.

• A disc can be inserted by putting it into the disc

compartment slot, and either pushing it lightly
with fingers or pressing LOAD/EJECT 

z

.

Intro Play

Press INT during playback.
INT indicator lights up and the first 10 seconds of
all the tracks on the disc are played in order.

When the desired track is found, press INT again.
The unit returns to the normal playback.

Note

• The intro play cannot be performed with the

repeat or random play.

Repeat Play

Press RPT during playback.
RPT indicator lights up and the currently selected
track is played repeatedly.

To cancel the repeat play, press RPT again.

Note

• If the repeat play is not selected, all the tracks on

the disc are played repeatedly.

• The repeat play cannot be performed with the

intro or random play.

• The repeat play cannot be performed by pressing

RPT 1. (CDC-X20M only)

Random Play

Press RDM during playback.
RNDM indicator lights up and the tracks on the
disc are played randomly.

To cancel the random play, press RDM again.

Note

• The random play cannot be performed with the

intro or program play.  If the repeat play is
selected during the random play, the random
play is canceled.

• During the random play, even If 

r

 is pressed

repeatedly, the track currently in play is restarted.

Содержание CDC-X15





















Отзывы: