Aiwa AM-HX50, Руководство по обслуживанию

Страница: 4 / 32

4
DISASSEMBLY INSTRUCTIONS
1. Removing the PANEL, BOT
Remove the screw A * 1 and screw B * 6, and remove the PANEL, BOT in the direction of the arrow.
* When attaching the PANEL, BOT, set the KNOB, SL HOLD.
2. Removing the MAIN C.B
1) Connect the shorting lands of the pickup by a solder bridge.
*
When the MAIN C.B is attached, remove the solder bridge.
2) Remove the FFC of the CN300, CN700 and CN100.
3) Remove the screw A * 3 and screw B * 1.
4) Remove the battery lid and remove the MAIN C.B, while being careful of the BAT-C.
*
When the MAIN C.B is attached, be careful of the BAT-C.
B
A
A
A
BAT-C
MAIN C.B
HINGE ASSY, BATT
* The BAT-C is attached under
the HINGE ASSY, BATT
B
B
B
B
B
B
A
PANEL, BOT
KNOB, SL HOLD