Aiwa ALP580, Инструкция по эксплуатации

Страница: 17 / 24

16
Sub-Menu on Photo screen
1. During photo playback, press the
screens show up (figu re 1).
2. Use
the button to select
icon and press
Figure 1.
Sub-Menu on Music screen
3. During music playback, press the
(figu re 2 ).
4. Use the button to select
icon and press
Figure 2
Sub-Menu on Movie screen
5. press the
(figu re 3).
6. Use the button to select
icon and press
Figure 3
Rotate
Zo... Zo...
+ -
M...
Rotate
Pause FB
FF Next Prev. Stop Re... Set A
PL... Info Go...
AB
i
MUTE
Pause FB
FF Next Prev.
Stop Re...
Set A PL... Info
St... Sl...
Go...
AB
i
AS...
Pause
Next
Prev.
Stop Re...
PL...
Info
i
background
music
screens show up
During movie playback,
screens show up
Using Bluetooth Playback
Pairing to Bluetooth Wireless Speakers or Sound Bar
NOTE: Bluetooth is OFF by default when the projector powers ON. Bluetooth can be turned ON or OFF from
the OPTIONS Menu.
1.
Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to which you wish to
connect.
Devices such as smartphones, tablets, or computers are not Bluetooth receivers and will
not connect to the projector. To eliminate confusion, you should disable Bluetooth on all
receivers to which you do not wish to connect.
2.
Power on the projector and make sure the projector's Bluetooth is ON (see note above). The
projector will begin searching for nearby Bluetooth devices to connect to, and will
automatically initiate pairing.
3.
When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a
chime or other audible noise.
Check the user manual on your Bluetooth receiver for more
information.
4.
When successfully connected, the projector will display the Bluetooth receiver's name on the
top right portion of the Main Menu screen, and sound played from the projector will be heard
through the Bluetooth receiver.
After initial pairing, the projector and the Bluetooth speakers will stay paired unless unpaired manually by
the user, or erased due to a reset of either device. If this occurs, or you find either unit is unable to
connect, repeat the above steps.