16
Menu 5: Preference Setup
1.
Press SETUP, then press the
buttons on the remote
‘Preference’ menu.
2.
the
buttons on the remote control to scroll to browse between
the sub-menus to select the stereo output:
a) TV Type
This unit is suitable for all makes for TV’s. You can select PAL or
NTSC if necessary. PAL needs to be selected for use in Australia.
b) Audio
These are the initial settings for your preference. If a setting is
supported by disc content, it will alter audio settings.
c) Subtitle
These are the initial settings for your preference. If a setting is
supported by disc content, it will alter subtitles. Alternatively,
press the SUBTITLE button.
d) Disc Menu
These are the initial settings for your preference. If a setting is
supported by disc content, it will alter the disc menu.
e) Parental
Select to control parental control settings. Any disc with the
parental level higher than the set level will not be played.
f) Password Set-up
The initial factory password is 0000. You can change the
password here.
control to open the
