15
b) Dynamic
This mode is recommended for reduced sound to avoid disturbance
during night time viewing. This setting can dynamically lower the
volume and still keep the original tone quality.
Menu 4: Video Setup
1.
Press SETUP, then press The
buttons on the remote
‘Video’ menu.
2.
the
buttons on the remote control to scroll to browse between
the sub-menus to select the stereo output:
a) Component
Adjust the video output when connecting to video terminals.
YUV: set video output in analogue component video format
when connecting to Component Video outputs.
b) Resolution (HDMI output)
You can choose the following resolution levels from the HDMI
output: 480I/576I/576P/720P(50Hz)/720P(60Hz)/1080I(50Hz)/
1080I(60Hz)/1080P (50Hz)/1080P (60Hz)
c) Quality
You can set the sharpness, brightness and contrast according to
your preference.
HDMI: factory default setting is ON, you can reset to OFF if necessary.
AUDIO Source: You can choose between Auto and PCM.
control to open the
d) HDMI Setup
