- 22 -
TEST MODE
There are two methods to perform operation check using test mode. One method uses the head unit. The other method uses the repair
jig. Because different operation buttons must be used for entering the operation modes and there are cases that unit does not run at all,
in the method that uses the head unit, the method using the repair jig is described as follows;
1.
How to start up the CD test mode
Connect the P.W.B Key in accordance “SERVICE JIG AND TOOLS” step (6). “How to use the repair jig - When the Control
Unit (CDC/CT) is not used” .
1)
While pressing the STOP button of the P.W.B Key, turn on the +12 V power of ACC/BACK UP.
2.
How exit the CD test mode
1)
Turn off the +12 V power of ACC/BACK UP.
3.
Function description of CD test mode
Uses of the respective buttons of the P.W.B Key are
described in Fig-11.
Fig-11
During the PLAY mode, the REV, FWD and DISC UP keys are invalid. Press the STOP key once.
Mode
Servo OFF
Search mode
Play mode
Sled mode
CD change
Operation key
STOP
FOCUS
FOCUS
V
SV ON
FWD
RVS
DISC UP
Operation
All servo off
Continuous focus search
Pickup lens repeats full swing (Note 1)
Normal playback
Pickup moves to outer circumference
Pickup moves to inner circumference
Disc unload
V
Magazine change
V
Disc load
Contents
APC circuit check
Laser current measurement
Focus error waveform check
Focus servo
Tracking servo
CLV servo
Sled servo
Sled servo
Mechanism operation check
Mechanism operation check (cyclic)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
