www.aivonet.com
www.aivonet.com
This section is intended to help solve the most common issues with the PoE Switch
• Incorrect Connection
Every port on the switch can automatically detect either straight or crossover cables when
you connect it to the Ethernet devices. However, depending on the device, others may
demand a specific cable type. Choose appropriate cable to connect between the units.
The RJ-45 connector should use correct UTP or STP cable, 10/100 Mbps port use 2-pairs of
twisted cable. If the RJ-45 connector is not correctly pinned then the link will fail.
• Faulty or Loose Cables
Look for loose or faulty cable connections. If they are appeared to be okay, make sure the
connections are snug. If the problem is not fixed, try a different cable and disconnect the
cable and reconnect it.
• Non-Standard Cables
Non-Standard and miswired cables may cause numerous network collisions and corrupt
other network performance. A cable tester is the recommended tool to verify the
connection in a cable signal.
Troubleshooting
