www.aivonet.com
www.aivonet.com
.
Hardware Description
• The Front Panel
• The Rear Panel
• LED Indicators
Per Device: Power
Per Port: LINK/ACT (Link/Activity)
Per PoE Port: PoE
The front panel consists of LED Indicators
The rear panel view of the PoE switch consists of a DC Power connector.
Power
LINK/ACT
PoE
On
On
Blinks
Off
On
Off
Green
Green
-
-
Green
-
The switch is supplied with suitable power.
The port is connecting.
The port is receiving or transmitting data.
The port is not linked successfully with the device
PD is connected
No PD is connected or power forwarding fails
LED Status Color Description
Figure 2. Front panel view of LED indications
Figure 3. Rear panel view of the switch
The PoE switch is designed as a segment switch that has a large address table and high
performance to deal with interconnecting networking segments.
PC, workstations, and servers can communicate with each other by directly connecting with
the PoE switch. The switch automatically learns nodes addresses, which are subsequently
used to filter and forward all the traffic based on destination address.
The PoE Switch can provide power to PDs that follow the IEEE 802.3af/at standard in the
network. It solves the problem of the position limitation. For a better performance, the
network devices should be installed in an appropriate position. The following figure is an
example of network application for Power over Ethernet Swtich.
Network Application
Package Contents
• DC Power Connector
Plug the female connector into the switch and male connector into a power outlet.
Supports input voltages 44~57 VDC.
• PoE Switch
• DC Power Adapter
• 4 Adhensive-backed Rubber Feet
• User’s Manual
• Warranty Card
Package contents include the following:
*IMPORTANT: If any piece is missing or damaged, please contact your local dealer or reseller for service.
• RJ-45 Ports (Auto MDI/MDIX)
Auto-sensing ports of 10/100/1000 N-way for 10Base-T, 100Base-T, 1000Base-T
connections. [In general, MDI means connecting to another Hub or Switch while MDIX
means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you
can connect to another Switch or workstation without changing pin-to-pin or crossover
cabling.] All of these ports can supply to PDs.
