Airzone EASYZONE AZEZ6FUJST, Быстрое руководство по установке

Страница: 25 / 108

25
ES
EN
FR
IT
PT
DE
SYSTEM INSTALLATION
Before performing the Airzone system installation, check:
•
The equipment to control has been installed according to the manufacturer’s criteria and it works correctly without
the Airzone system.
•
In direct expansion unit systems, the indoor unit wired thermostat has been installed.
In order to install the Airzone system, carefully follow these steps:
Install the Easyzone (see section Easyzone assembly) .
- Attach the Easyzone to the indoor unit.
- Install the flexible duct and the air diffusion elements.
Connect all the necessary elements
(see section Main control board connection )
.
- Connect the communication gateway to the indoor unit.
- Connect all the elements of the system (thermostats, modules, etc.).
- Power the main control board.
Check all the assembly and the connection are correct
(see section Assembly and connection evaluation )
.
Configure the system.
- Configure all the thermostats (see sections Initial configuration and Advanced settings ).
If you have any other doubt, check the user and installation manuals.
It does not require any maintenance.
Access all our technical documents and the self-diagnosis section, check the most FAQs,
certificates, watch our videos and read our declaration of conformity at:
myzone.airzone.es/productos/
EASYZONE ASSEMBLY
Important: It is recommended to insulate all the metal parts of Easyzone that are exposed to outdoor conditions in order to
prevent condensation.
Remember:
The motorized elements are numbered the following way:
Plenums from 2 to 6 dampers Plenums of 7 and 8 dampers