25
INITIAL CONFIGURATION EVALUATION
Check the following aspects:
•
Opening-closing of the valves: Turn on the system and generate demand in all the zones. Then, switch off and on all
the zones to verify the associated valves are correct.
ADVANCED SETTINGS
To access the advanced configuration menu of the Blueface and Think thermostats follow the following steps:
Blueface
Think
Important:
Use
to confirm and
to return.
SYSTEM PARAMETERS
•
System address.
The
Supermaster
option
allows you to impose the operation mode of the system to the rest of the
systems connected to the CCP in a semi-forced way:
•
Temperature range.
Use this parameter to select the highest temperature in heating mode (19-30 ºC, by default 30ºC).
•
Wireless valves.
Allows you to associate/release a valve. Allows you to open/close the wireless channel of the
AZX6CM1VALR module. Allows you to reset the AZX6CM1VALR module.
•
Radio channel.
It activates/deactivates the wireless association module of the system for thermostats.
•
Reset system
(only available for master thermostat Blueface)
.
Resets the system and returns to factory settings. To
reconfigure the thermostats, please check
Initial configuration
).
Press and hold
Operation mode:
System 1
Available operation modes:
Rest of the systems
Press once
Press and hold
Press and hold
