Airxcel MAXXFAN DOME Series, Инструкции по установке, информация и руководство по эксплуатации

Страница: 4 / 8

CAUTION!
Disconnect main vehicle power before connecting 12
volt DC power to the
MAXXFAN Dome exhaust fan .
STEP 5
•
If the roof is thicker than 1 inch the extension sleeve must
be used.
•
A roof that is 6 inches thick will use the full-length
extension sleeve without trimming.
•
If the roof is between 1 inch and 6 inches, the extension
sleeve may need to be trimmed.
•
Measure the distance from the vehicle ceiling to the base
of the MAXXFAN Dome fan. Cut the extension sleeve
longer than the dimension measured to accommodate the
depth of the garnish ring. Refer to table below for
additional length required.
NOTE: Mark and cut the extension sleeve per figure 5
shown above.
VEHICLE ROOF
THICKNESS
LENGTH TO ADD TO
CEILING THICKNESS
MEASUREMENT
LED NON-LED
1 1/8 to 5 7/8 inch 15/16 inch 1/2 inch
VEHICLE
ROOF
THICKNESS
SLEEVE LENGTH TO CUTOFF
LED NON-LED
6.0
NONE (use full
length sleeve)
NONE (use full
length sleeve)
1.0 inch
Not Applicable,
Sleeve not
used
Not Applicable,
Sleeve not used