background image

INFORMATION AND OPERATING GUIDE

FOR MAXXFAN

®

 

Plus

 MODELS

4000KI • 4500KI • 4540KI

KNOB, VENT LID OPEN/CLOSE

Manual Opening Models

Pull to unlock prior to turning.  Rotate Knob 

clockwise  to  Close  Vent  Lid;  Rotate  Knob 

counter-clockwise to Open Vent Lid.  Push 

“IN” to lock when Vent Lid is open or closed.

Automatic Opening Models

Allows closing of the vent lid in the event of 

Caravan  power  loss.    This  knob  does  not 

lock.    Do  not  push  in  or  pull  out.    Rotate 

knob clockwise to close vent lid; rotate knob 

counter-clockwise to open vent lid.

Do not use excessive force when operating 

Knob.

KEYPAD CONTROLS

Use Keys on Keypad to control MAXXFAN

functions (see descriptions on next page).

INSECT SCREEN RETAINER KNOB

Rotate all 4 knobs 1/2 turn to remove screen.

CAUTION:  Never operate fan with screen removed.  When removing screen for 

cleaning, turn the MAXXFAN OFF and remove the vehicle 12 volt power to the 

MAXXFAN.  When cleaning your MAXXFAN, use only a mild detergent solution.

RAIN SENSOR - 4500/4540 MODELS ONLY

  -  If  the  Rain  Sensor  circuit  detects 

moisture, it will TURN OFF the fan and close the lid.  If ANY key is pressed when the Rain 

Sensor is still wet, the fan will BEEP THREE (3) TIMES.  Press the FAN ON/OFF key to 

restart the fan after the Rain Sensor has dried. 

CAUTION: If the lid is opened MANUALLY, the RAIN SENSOR will not close the 

MAXXFAN lid.

CEILING FAN MODE

With the fan motor running, close the Vent Lid to enter Ceiling Fan Mode.  The fan motor will 

continue to run and circulate air within the Caravan cabin.

SERIAL NUMBER LABEL

The serial number label is located underneath the round insect screen.

NOTE: 

 The MAXXFAN is designed to be fully opened or fully closed when the vehicle is 

moving.

THERMOSTAT 

TEMPERATURE SENSOR

Содержание maxxfan 4000KI









Отзывы: