13
ICE by Envicool DC Cabinet Cooler I&O Manual
08/2020 Rev.7
ON/OFF
ENTER
ESC
Figure 7. Control Interface
ON/OFF:
ON/OFF
Button, (long press this button, about 4s) this can be used to turn
on/off the unit.
Up
Button, which is used to select the previous record/menu or increase the
setting value (password only).
Down
button, which is used to select the next record/menu or decrease the
setting value (password only).
Left
button, which is used to increase the setting value during the parameter
setting or select the previous bit of the data during the password setting.
Right
button, which is used to decrease the setting value during the parameter
setting or select the next bit of the data during the password setting.
ENTER:
ENTER
button, which is used to confirm the entry.
ESC:
Quit button, which is used to return to the previous page menu.
If there is no keyboard operation for a continuous 60 seconds, it will automatically
return to the normal display interface.
When any button is pressed after the system is powered up, the backlight will turn on. If
there is no keyboard operation for a continuous 60 seconds, the backlight will turn off.
The factory default operation password of the unit is “0001”. To change it, press
ENTER
on the normal display interface to enter the password input interface, press the
LEFT
button or
RIGHT
button to select the digits to change, and press the
UP/DOWN
button
to change the relevant digits, and finally press
ENTER
button to confirm the change.
If the password is incorrect, the interface will display an error message, and the unit
setting cannot be changed. If the password is correct, you can enter the main menu and
edit the unit setting.
