5
Value Lash Settings Cold
Kobota Z482 Intake 0.007 / Exhaust 0.007
Yanmar 3TNV Intake 0.008 / Exhaust 0.008
Twister Starting Procedure
Diesel Engines
*
Turn ignition key to the left and hold for 15 seconds. This primes the fuel pump and engages the
pre-heater. In cold temperatures (below -10 degrees C), hold pre-heater for up to ONE minute
if required
NOTE: NEVER USE STARTING FLUIDS
*
Now turn the key to the right (crank position). When engine has started release key.
*
When engine ha
s “reached operating temperature”, engage the compressor switch; this will allow
the compressor to start.
*
When pressure reaches preset pressure (150 to 170 psi) unit will idle down.
*
System is now ready for use.
Twister Shutdown Procedure
Diesel Engines
*
Switch compressor button off.
*
Compressor will disengage and bleed off pressure.
* Allow engine to idle 30 seconds
*
Turn key to off position.
* Engine will stop
* Never shut the engine off with compressor under load. This may result in compressor damage.
