Airwheel H3TS+, Руководство пользователя

Страница: 9 / 124

- 6 -
Installation and usage
When removing the battery case, first make sure that the main
power switch is off. Unplug the battery bus connector (as shown
in Figure 1-1), press the spring clip and pull out the battery case
(Figure 1-2); when the battery is installed, insert the battery box
directly until the spring clips the battery box, then put Insert the
battery bus plug into the battery bus jack.
Note:
1.
Pay attention to the front and back of the battery case, and the
side with the sticker facing up.
2.
When the battery bus is plugged in and out, please align the
card slot with the protrusion (as shown in Figure 1-3).
3.
Do not touch the main wires and charging port with metal
objects when the main battery switch is turned on, to prevent
damage to accessories and danger.
1. Battery disassembly instructions
1-1
1-3
1-2
Main power
switch
bus bump
bus plug
shrapnel
top sticker
2.Main power switch
Tip: Please turn off power to prevent the battery from over-discharging if riders don’t use it.
When the indicator is on, H3TS+ is powered on, and when it's off,H3TS+ is powered off.