ON-UNIT INDICATORS AND CONTROLS
STAND-BY
INDICATOR
Lights up when the air
conditioner is connected
to power and ready to
receive the remote control
commands.
A
OPERATION
INDICATOR
Lights up during
operation. Blinks once to
announce that the remote
control infrared signal has
been received and stored.
Blinks continuously in
protection mode.
B
TIMER INDICATOR
Lights up during timer
and sleep operation.
C
FILTER INDICATOR
Lights up when air filter
requires cleaning.
D
COOL / HEAT / OFF /
ON UNIT OPERATION
BUTTON
Used to switch the unit
OFF or to turn it ON for
COOLING or HEATING
without the use of the
remote control.
F
HEATING
INDICATOR
Lights up only when
Mode (F) is pressed.
G
RESET BUTTON
●
Press to turn off the
FILTER indicator and to
reset the filter function,
after the clean filter has
been reinstalled.
●
Press to cancel the
buzzer announcer, if
elected.
H
SIGNAL RECEIVER
●
Receive signals from
the remote control.
I
ON-UNIT OPERATION
If the air-conditioner cannot be operated by the Remote Control unit, it
can be turned on for cooling or heating, or completely turned off, by
pressing MODE button (F) on the air-conditioner. The MODE button will
change the operating status of the unit between - COOLING - HEATING
- STAND-BY positions, every time it is pressed. Indicators (E), (G) or
(A) will light up respectively, to indicate in which mode the air-conditioner
operates.
On units for Cooling only, do not set MODE switch on HEAT position.
AUTO-HORIZONTAL AIR MOVEMENT (J)
For Auto movement turn switch (J) to position (1)
For desired air blades positioning turn switch momenterily to position
(2) and then to (3).
Note: in some models this function is manual
Horizontal air
movement switch.
J
COOLING INDICATOR
Lights up only when
Mode (F) is pressed.
E
Lift up
the units
display
cover to
reach
the on
unit
control
6
MODELS: WS 090C / WS 090H / WS 100H
