�
Fit the nuts of the (for med) tubing into the recess provided on the template. (Fig 7-2)
�
Secure the tubing with the clamps provided. (Fig 9)
�
Remove the tubing template; you can now install your unit on its support.
NOTE
output from the rear
�
The slanted hole prevents condensates or rain from entering the unit.
�
Fit a Dia. 70 mm sleeve into the hole.
Insulated liquid piping
Insulated gas piping
Secure the piping with
the clamp sprovided
WARNING
The piping must be
closed to prevent
impurities from entering
Remove the template
4
uNIT INSTALLATION
A Install the unit to wall support
FOR THE AIR INLET GRILL:
1 Pull the grill forwards.
2 Remove the two end screws.
3 Unscrew the central screw, but do not remove it completely.
4 Unhook the grid.
FOR THE SIDE PANELS:
5 Remove the side panels (downward movement).
IMPERATIVE
- For ceiling mounting, install the two clamp
screws (provided) for the unit on the support.
1
B Installation of the SXV on the wall support
● Refer to the diagram below, for installation of the SXV.
● Ceiling mounting (refer to the NOTE below).
Fig 9
Fig 10
Fig 11
Fig 12
Fig 13
