In cooling mode or dehumidifying mode, 1 hour after the sleep curve is set, the setting
temperature will rise by 1 degree C , 2 hours later, the setting temperature will rise by 2
degree C. After 2 hours, the setting temperature will not change any more.
Press button I FEEL to activate the I FEEL function. Thermometer sign will appear on
the LCD operation display .Select suitable temperature setting. Make sure that
the remote control unit is aimed at the air conditioner. Prevent the I FEEL sensor from
being affected by heat sources such as lamps, heaters, direct sun, etc. or from being
directly affected by the air conditioner air flow.These may cause the sensor to transmit
the wrong temperature data, thereby disturbing the performance of the I FEEL function.
The LCD display shows actual room temperature under I FEEL mode, press any
button will switch the temperature display to set temperature, and 3 seconds later,
system will revert back to the room temperature display.
By pressing - and + bottoms simultaneously to lock the last operation program. All the
function buttons will be inoperative, including POWER button. By pressing both buttons
again the remote control will be released from its locked position.
I FEEL/ROOM TE MP FUNCTION OPERATION
LOCK FUNCTION
SETTING THE TIMER
The timer can be selected by pressing TIMER button.
The daily timers can be set for ON and OFF separately for two different time periods.
Timer setting will not change until new setting is input.
A) HOW TO SET THE ON TIME
1. Press the TIMER button to select the ON Timer
2. Press the + or - button until the desired value
is displayed.
3. Wait for 3 seconds and the timer is activated.
B) HOW TO SET THE OFF TIME
C) HOW TO ACTIVATE THE TIMER REPEATING FUNCTION
• On the first time connecting to the power, if pressing the RP button, the default ON timer
is 7:00 and OFF timer is 18:00.
• Press RP button after Timer ON-OFF has been set will initiate Timer repeating function
with current Timer ON-OFF setting or the Timer ON-OFF setting adjusted after.
• Press RP button when there is no Timer ON-OFF setting will initiate Timer repeating
function with previous Timer ON-OFF settings and transmit the signals to the unit.
• When the Timer Repeat function is activated, press the RP button again to cancel the
Timer Repeat function.
NOTE:
Please keep the remote control where its signals can reach the receiver of the unit. When
you select the timer operation, the remote control automatically transmits a signal to the
indoor unit at the specified time.
1. Press the TIMER button to select the OFF Timer
2. Press the + or - button until the desired value
is displayed.
3. Wait for 3 seconds and the timer is activated.
OPERATIION
OPERATIION
9
10
In heating mode, 1 hour after the sleep curve is set, the setting temperature will
decrease by 1 degree C 2 hours later, the setting temperature will decrease by 2
degree C. After 2 hours, the setting temperature will not change any more.
TIMER
MODE
SLEEP
I FEEL
TURBO
ION
CLR
R P
CLEAN
LIGHT
EYE
TIMER
DISPLAY
ENGLISH
