Required tools for installation
Attached accessories
No.
Accessories part
Qty.
No.
Accessories part
Qty. No.
Accessories part
Qty.
1
Installation paper board
1
5
Pipe insulation
4
9
Clamp
6
2
Drain hose
1
6
Washer
4
10
Sealing material
2
3
Insulation
1
7
Bolt
2
11
Operation
manual
Installation
manual
2
4
Hoseclamp
1
8
Bolt
8
1.Screw driver
4.Hexagonal wrench
7. Knife
2.Electric drill, hole core drill ( 60 mm)
5.Pipe cutter
8.Measuring tape
3.Spanner
6.Reamer
9.Torque wrench
Optional accessories
Name
Used for
Panel 625mmX625mm
Gird ceiling installation
Panel 725mmX725mm
Hard ceiling installation
Note
Decoration panel is separated from unit when packaging,
select proper panel for different installation situation.
1
SELECT THE BEST LOCATION
Do
install the cassette in a place meets following conditions:
1. Allow max. Air flow to the desired space;
2. Allow max. Return airflow;
3. Ensure adequate drainage of condensed water;
4. Leave a minimum 250mm free space in front of the filter;
5. Allow a free service access to electrical box;
6. Allow easy access to the base of the indoor unit while providing enough space from the ceiling;
7. It is better to install the unit in the center of the room,and the installation height should over 2.3m.
8. The distance between air-conditioner and obstacles should meets the requirments in fig1.
Do not
install the cassette in a place like following:
1. Do not install the cassette in a room where gasses, acids or inflammable products are stored, In order to avoid damage to the aluminum and copper
evaporators and the internal plastic parts.
2. Do not install the cassette in a workshop or a kitchen. Oil vapor attracted by the treated air could form deposits on the cassette evaporators and
modify their performance or damage the cassette's internal plastic parts.
3. Do not install the cassette in launary or a room where steam is produced.
This air conditioner has the optional 2-way/3-way air discharging according to installation location. Use sealing material in accessory parts to seal the
related air outlets.
Fig 1 Installation requirment
Fig 2 Air flow direction (example)
4-way direction (Default)
3-way direction
2-way direction
