AirTies AP-400, Руководство пользователя

Страница: 5 / 24

3
The AirTies AP-400 is an IEEE 802.11b/g compliant, 54 Mbps wireless communication device
that can be used as a Wireless Access Point, Repeater, Bridge or a 4-port Switch.
You can connect the AirTies AP-400 to a wired modem or router through one of the
Ethernet ports to setup a wireless local network and enable your wireless computers to
access the Internet.
As a
repeater
, the AP-400 makes it possible to extend the coverage area of a wireless
network. AirTies Mesh Technology is used for this purpose.
The AirTies Mesh Technology resolves problems such as loss of wireless signal or limited
coverage area often encountered in multiple-story or reinforced concrete buildings. To
extend your wireless coverage, all you need to do is to add new AP-400 devices to your
wireless network and set them to function as repeaters. Computers on the network
connect to the AP-400 with the strongest signal, and reach the router or the wired network
through the AirTies Mesh Network.
Used as a switch , it lets you attach four PCs or any devices with an ethernet interface
(such as network printers or gaming consoles) directly. You can daisy-chain out to more
hubs and switches as your network grows.
The AP-400, used as a bridge , enables devices without wireless capability but with an
Ethernet interface (such as printers and desktop computers) to be included in a wireless
network.
1.
Introduction
AirTies AP-400 User Manual
Access Point and Bridge
Access Point
Repeater
Bridge
Repeater