WARRANTY:
ATI AirTest Technologies, Inc ( the company) warrants all instruments manufactured
by them to be free from defects in materials and workmanship under normal use and
service for a period of one year. Electrochemical and Catalytic Bead sensors
purchased from sensor manufacturers will be warranted to the extent offered by the
manufacturer. The company’s obligation of this warranty shall be limited to the repair
or replacement of any part found to be defective. The company shall not be obligated
to repair or replace units that are found to be in need of repair because of damage,
(other than normal wear and tear), tampering or modification. The detector must be
returned to AirTest suitably packaged and with freight prepaid. Liability is limited to
the replacement cost of a new unit. In no case shall the company be liable for any
consequential or incidental damages however caused. No agent, dealer or employee
of the company has the authority to increase or alter the obligations or limitations of
this warranty.
SPECIFICATIONS:
Sensing Element
Catalytic Bead
Standard Range
0 to 100 % LEL
Combustible gas
Gas Sampling Method
Diffusion
Linearity
Linear
Operating Temperature
-20
°
C to +50
°
C
-4
°
F to +122
°
F
Dimensions(LxWxD) in. TR5200-6.2 x 4 x 2.4 TR5500-6.8 x 3.5 x 4
cm. 15.6 x 10 x 6
17.3 x 9 x 7.6
Humidity ( non-cond.)
0 to 90%
Sensor Life Expected
3+ years
Calibration Interval
12 months
Warm-up Time
< 3 minutes
Response Time
< 1 minute
Power Requirement
12 to 30 VDC
Power Consumption
< 2 watts
Output
4-20 mA
Enclosure Material
TR5200-PVC, TR5500 Cast Aluminum
Weight
TR5200-16 ounces, TR5500-4 lbs.
Approvals
TR5200-CSA/NRTL
TR5500-CSA/UL Cl.1, Div.1
6
ATI AirTest Technologies, Inc
#9, 1520 Cliveden Avenue
Delta, BC, V3M 6J8
Ph. 604-517-3888
Fx. 604-517-3900
e-mail [email protected]
website www.airtesttechnologies.com