Airstream INTERNATIONAL TRAILER, Руководство пользователя

Страница: 118 / 138

AIRSTREAM INTERNATIONAL TRAILER OWNERS MANUAL
G-30
9.
To go to the next point up, press the button. While the button is held down, the next point number
(for example "PI 5") will be shown. When the button is released the signal level for that point will be
shown. Again, if that receive segment has been cut off it will show zero signal. If you hold the button down
longer than about 10 seconds the display will shut itself off.
10.
When P1 is reached (the top receive segment), pressing the button again will cause the display to
show "nPt" indicating that the display will get an updated set of points from the same sender. If you hold
the button down longer than about 10 seconds the display will shut itself off. When the button is released,
the display will flicker
"dLY" quickly indicating that it is receiving the most recent set of advanced
diagnostic data from the same sender. This data can be stepped through just like the first set.
11.
If you do not press the button for 30 seconds the display will shut itself off. If the button is
repeatedly pressed to cycle through the data over and over, this process can be repeated indefinitely.
Monitor Wire Color Function
Red + 12V power input to gauge, can be also source of power for the pump
Black Ground
Yellow Pump +12V power
Green LPG Sender
Brown Black water tank sender
Gray Gray water tank sender
Blue Fresh water tank sender
TANK WIRING COLORS
FRESH WATER TANK: Ground wire color WHITE connected to BLACK wire of sender.
Sender wire color RED connected to YELLOW wire of sender.
BLACK WATER TANK: Ground wire color WHITE connected to BLACK wire of sender.
Sender wire color BROWN connected to YELLOW wire of sender.
GRAY WATER TANK: Ground wire color WHITE connected to BLACK wire of sender.
Sender wire color GREEN connected to YELLOW wire of sender.