Airstream 360 XC Land, Руководство пользователя

Страница: 65 / 120

AIRSTREAM 360 XC LAND YACHT OWNERS MANUAL
G-12
GALLEY FAUCET, MOEN PURETOUCH CLASSIC
1-800-374-6542
WATER FILTRATION SAFEGUARDS
Your Moen PureTouch® Classic Filtering Faucet System integrates carbon block filtration technology
designed by Culligan International into a faucet spout. This technology is fast and effective at reducing
contaminants commonly found in water and is certified by NSF® International. The PureTouch Filtering
Faucet System and installation must comply with State and Local laws and regulations. To ensure optimal
operation of your new Moen faucet, please read the following safeguards carefully.
MicroTech™ Filter Cartridges
•
MicroTech filter cartridges will reduce:
Chlorine, Taste and Odor (MicroTech 400, 600)
Lead (MicroTech 400,600)
Cysts (Cryptosporidium, Giardia) (MicroTech 600)*
*The contaminants removed or reduced by this filter are not necessarily in your water.
•
Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfections before or after the system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
•
MicroTech filter cartridges are designed for replacement after dispensing 200 gallons of filtered
water. Water conditions and usage may affect filter life and water taste.
•
The electronic indicator will signal when filter replacement is necessary
•
Use only MicroTech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet
System.
•
Filter flow rate = .4-.5 gpm at rated pressure (20 psi min. – 125 psi max.).
Water Temperature
•
Minimum/Maximum faucet operating temperature = 40 degrees – 150 degrees F
•
CAUTION: Do not filter water above 100degrees F.
MicroTech Filter Flushing Instructions
•
New MicroTech Filter Cartridge: Allow cold water to run through a new filter for 5 minutes to
flush out any loose carbon particles. Once these small black specks are washed out the filter is
ready for use.
•
Daily Use: Allow cold water to run through the filter for 10-15 seconds prior to first use. If the
filter has not been used for two days, run cold water through the filter for 60 seconds prior to use.
Questions
•
If you have any questions please call our toll-free help lines:
1-877-374-6542
Saturday 8:00 a.m. to 6:30 p.m.
1-877-DRINK-H20 Monday through Friday 8:00 a.m. to 8:00 P.M.