Airstream 360 XC Land, Руководство пользователя

Страница: 39 / 120

AIRSTREAM 360 XC LAND YACHT OWNERS MANUAL
D-3
WEEKLY TESTING OF YOUR SMOKE ALARM
1. FOR A COMPLETE WEEKLY TEST OF THE ELECTRONICS AND THE SENSOR OPERATION,
FIRMLY DEPRESS THE TEST BUTTON ON THE COVER OF THE SMOKE ALARM FOR A FEW
SECONDS. The smoke LED (light emitting diode), which is the indicator light under the clear Push-to-
Test button, will blink once per second while the button is being pushed and the alarm is sounding. The
smoke alarm will stop sounding when you release the button.
2. If your smoke alarm has the False Alarm Control or Safety Light feature see "SPECIAL SMOKE
ALARM FEATURES" for further testing information.
3.
IMPORTANT: Always test your smoke alarm upon returning from vacation, or any other time when no
one has been in your household or residence for several days.
4. If a smoke alarm is installed in a mobile home, test the smoke alarm after you remove the vehicle from
storage and before each trip.
! WARNING: If your smoke alarm does not respond as described in any of the above tests, check
that a good battery is properly installed. If a good battery is properly installed, promptly remove the
unit, repack it and return it for repair or replacement.
TAKING CARE OF YOUR SMOKE ALARM
Your smoke alarm has been designed and manufactured to be as maintenance-free as possible. Here are a
few simple steps you must perform, in addition to the weekly tests described in the section "WEEKLY
TESTING OF YOUR SMOKE ALARM," to keep your unit in good working order.
•
The smoke alarm should be vacuumed monthly or more often if there is dust, dirt or kitchen
grease that can accumulate. Use a soft brush or wand attachment and vacuum all slots in the cover
and side. FOR YOUR SAFETY, you must properly clean and maintain your smoke alarm, since a
dirty or malfunctioning unit may fail to alarm or cause unwanted nuisance alarms.
•
If the unit is damaged or fails to operate properly, and you have checked that a good battery is
installed correctly, follow the directions in the section "WHERE TO SEND YOUR SMOKE
ALARM IF IT NEEDS SERVICE" for return. FOR YOUR SAFETY, DO NOT OPEN THE
SMOKE ALARM AND TRY TO REPAIR IT YOURSELF. While smoke alarms are economical
devices, they contain precision electronic components that are precisely calibrated. The
manufacturer must do repairs.
REPLACING THE BATTERY
The smoke alarm will "beep" once a minute for at least 30 days when the battery is weak. The battery must
immediately be replaced with a fresh one.
The battery should also be changed if it does not sound an alarm when tested. TO REPLACE THE
BATTERY:
1. Check if the tamper resist locking pin is installed in the smoke alarm (see "USING THE TAMPER
RESIST LOCKING MECHANISM" section). If so, pull the pin completely out of the smoke
alarm using long-nose pliers.
2. Remove the smoke alarm from the mounting bracket by twisting counterclockwise
3. Replace old battery with a fresh one. If your smoke alarm has a safety light, the miniature lamp
operates on two AA batteries. (See recommended batteries below.)