
D - 16
ExTERIOR
D - 17
D
loading.
CARGO PLACEMENT AND RESTRAINT
Cargo that is likely to roll (bicycles, tool chests, barrels, etc.) should be re-
strained by chocks, blocks, wedges, a cradle or other equivalent means to
prevent rolling. Whatever you use to prevent rolling should not be able to be
accidentally unfastened or loosened while the trailer is in motion.
PROPER USE OF TIE DOWNS
There are several tie down rings installed in the floor of the rear cargo area.
Avoid using tie downs and securing devices with knots. Be sure to attach
and secure each tie down so that it can’t come loose, unfastened, opened or
released while the trailer is in motion. Also, use edge protection whenever a tie
down could be damaged or cut at the point where it touches an article of cargo.
Avoid using “bungee” cords.
TIE DOWN MINIMUM WORKING LOAD LIMIT
The working load limit of a tie down, associated connector, or attachment
mechanism is the lowest working load limit of any of its components (including
any tensioner device), or the working load limit of the anchor points to which
loading/unloading; making sure they know where you are.
Slow down and pay attention; never hurry around loading/unloading
•
operations.
Train everyone in your travel group on the hazards of loading and
•
unloading.
Establish and enforce compliance to all safety procedures.
•
CARGO AREA PREPARATION
The rear cargo space is easily prepared for storing those items you wish to
travel with.
1. Remove the dinette table top and pedestal. The pedestal post slides out of
its floor and table top brackets. The pedestal post stores in the wardrobe. The
front bed top is hinged and is equipped with a bed prop. Lift the bed top and
you will see the storage brackets for the table top. Slide the dinette table top
into the brackets, close the bed top and the table is stored safely out of your
way.
2. Remove the cushions from the dinette seats and rear lounge. The dinette
seats and lounge are equipped with hinges and a slide bolt. Lift the seats and
lounge up towards the wall and secure them with the slide bolts. Cushions
can be place between the seats and the wall for storage. The area is ready for
Содержание 2013 International
