ELECTRICAL
G - 18
G
G - 19
noted. Antenna is now locked in travel position.
Warning
: Antenna must be in “down” position while travel-
ing to prevent property damage.
Lubrication
To lubricate the elevating gear apply a liberal amount of silicone spray lubri-
cant to the elevating gear with the lift in the down position, then run the lift up
and down a few times to distribute lubricant over gears.
Lubricating Rotating Gear Housing
In the event that rotating the antenna becomes difficult, lubricating the bear-
ing surface between the rotating gear housing and the base plate can restore
normal operation. Any spray type silicone lubricant may be used.
Elevate antenna and remove setscrew from rotating gear housing as shown.
Spray lubricant into hole and around edges of gear housing. Rotate gear
housing until lubricant coats bearing surfaces and antenna rotates freely.
LUBRICATE HERE
SPRAY AROUND EDGES REMOVE SET SCREW
TV Booster/12 Volt Outlet
The TV booster amplifies the signal from the
TV antenna. Pushing the small button acti-
vates and deactivates the booster. A green
light comes on when the booster is activated.
For viewing while hooked up to an exterior
cable TV source, turn the booster off.
NOTE: The TV Booster must be on to receive antenna signals and off for
cable TV operation.
Please review the antenna and booster manuals include in your owner’s
packet before operating the system.
TV Outlet
w/Booster &
12 Outlet
12 V
Outlet
Booster
Switch
TV Cable
Hook Up
Light
Содержание 2013 Classic
