Airstream 2011 FLYING CLOUD, Руководство пользователя

Страница: 37 / 113

C - 8 C - 9
C
CAmpING
break down natural materials, such as wood products and fabrics. Knowing
the potential risks is important for any type of homeowner to protect their
investment.
What factors contribute to mold growth?
For mold growth to occur, temperatures, indoor or outdoors, must be between
40 degrees and 100 degrees Fahrenheit and also have a source of moisture,
such as humidity, standing water, damp materials, etc. Indoors, the most rapid
growth occurs with warm and humid conditions.
How can mold growth be inhibited?
By controlling relative humidity, the growth of mold and mildew can be inhibited.
In warm climates, use of the air conditioner will reduce the relative humidity.
Vents are located in the bathing and cooking areas and constant use is advised
during food preparation and bathing, even during colder weather. Additionally,
opening a window during these activities will assist in ventilation. In extremely
humid conditions, the use of a dehumidifier can be helpful.*
Frequent use of your RV or cleaning regularly is an important preventive
measure. Further, any spills should be wiped up quickly and dried as soon
as possible. Avoid leaving damp items lying about. On safe surfaces, use
mold or mildew killing cleaning products. Check sealants regularly, and reseal
when necessary to avoid water leaks. Proper preventive maintenance to the
RV and its accessories, as described both in this manual and in accompanying
literature, will provide the best protection to the RV.
For more information of controlling moisture in the RV, please read, “Tips to
Controlling Condensation,” located in this manual.
*If using a dehumidifier, please read and follow all manufacturer instructions
and recommendations to the use and cleaning of the dehumidifier.
SAFETY
As always, safety should be one of your top priorities. Make sure you, and
everyone traveling with you, can operate the main door and emergency exit
window rapidly without light. Contemplate other means of escape in case the
designated exits are blocked.
The escape windows(s) are identified by their red release handles. Lift up both
latches to release the escape window. Push out on the glass and it will swing
clear.
WARNING
: The window operation should be checked each trip