Airssential Home LifeTemp Radient AI-RADTH, Инструкция по эксплуатации

Страница: 7 / 20

7
LifeTemp
®
Radient
®
Non-Contact Thermometer
Setting the Measurement Completion Sound
To silence the measurement completion sound (the beep), press the Sound
button
when the thermometer is on. Each time the sound button is pressed, the measurement
completion sound will be switched on or off.
After pressing the Sound button, if the LCD screen displays the
symbol, the
thermometer will emit the measurement completion sound.
Alternatively, after pressing the Sound button, if the LCD screen displays the
symbol,
the thermometer will be in silent mode.
!
The thermometer will not maintain this setting change. The measurement
completion sound will be restored to “on” when the thermometer is next
activated.
Using the LifeTemp Radient Non Contact Thermometer
Measuring Body Temperature
Start the thermometer, by pressing either the
or button.
!
The thermometer always starts in body temperature mode as confirmed by the
baby face icon
in the top left hand corner of the LCD screen.
With the thermometer now on, bring it to a distance of 2cm to 3cm from the patients skin,
and press the
button. Maintain this distance until the measurement completion
sound is heard. If the thermometer is in silent mode maintain the distance for approximately
2 seconds. The ideal temperature measuring point is the temporal artery, between the
hairline and eyebrow. See Figure 4.
FIgURE 4